Sopix2 X-ray systems integrate the best of modern technology (Fiber-optic based CMOS).
High-definition images and striking contrasts can be achieved to greatly simplify diagnoses.
Size “1” is used vertically for x-raying one to three teeth.
Size “2” is recommended for horizontal use for bitewing x-rays.
The corners of the sensor are rounded for easier placement inside the mouth and for increased patient comfort.
This exclusive technology analyzes in real time the amount of X ray emission required by the Sopix2 sensor. It protects each image from overexposure and ensures that the first shot is always perfect and all your images are clear.
The Ace is a Sopro exclusive and has been patented.
Image improvement: enhancement processing filters are parametered according to the amount of X ray exposure received by the Sopix2 sensor.
Management of the exposure period: a control witness allows the dentist to optimize the exposure period.
With Sopix2, your x-ray images will be clear the first time they are taken. Patients are protected from exposure of unnecessary x-rays. The precautionary principle is essential.
The smaller size of the controller means that Sopix2 can easily be hung from your generator.
| Size 1 | |
| External dimensions | 25 x 39 mm |
| Active surface area | 600 mm2 (20 x 30 mm) |
| Number of pixels | 1.50 million |
| Size 2 | |
| External dimensions | 31 x 42 mm |
| Active surface area | 884 mm2 (26 x 34 mm) |
| Number of pixels | 2.21 million |
| Controller | |
| Technology | CMOS + CSI scintillator + optic fibre |
| Theoretical resolution | 25 lp/mm |
| Pixel size | 20 µm x 20 µm |
| Connection | USB 2.0 |
| USB Cable length | 3.70 m (up to 8.70 m with booster supplied) |
| Imaging software | Sopro Imaging |